Home > Elevator Furnace >

Bf230-10 Bell-Jar Furnace with a Rated Temperature of 850 º C, Heat Treatment Furnace, Muffle Furnace

Product Categories

Hefei Chitherm Equipment Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Bf230-10 Bell-Jar Furnace with a Rated Temperature of 850 º C, Heat Treatment Furnace, Muffle Furnace

Name: Bf23010 BellJar Furnace with a Rated Temperature of 850 º C Heat Treatment Furnace Muffle Furnace
Brand: Chitherm
Price: 1 USD

Cheap Bf230-10 Bell-Jar Furnace with a Rated Temperature of 850 º C, Heat Treatment Furnace, Muffle Furnace for sale

Brand Name : Chitherm

Model Number : BF230-10

Place of Origin : China

MOQ : 1

Price : Negotiable

Payment Terms : Customized

Supply Ability : 50 Sets/Year

Delivery Time : Customized

Packaging Details : Customized

Range of Applications : Industrial

Type : Electric Holding Furnace

Usage : Steel Molding

Fuel : Electric

Atmosphere : Air

Effective Chamber Dimensions : 1520*1520*2250(mm) (W*H*D)

Rated Temperature : 850ºC

Maximum Temperature : 1000°c

Transport Package : Wooden Packaging

Specification : 1520*1520*2250(mm) (W*H*D)

Trademark : Chitherm

Origin : China

HS Code : 8514101000

Customization : Available

Certification : ISO

Place Style : Vertical

Contact Now

1.Model: BF230-10 Bell Furnace

2.Application

This equipment is mainly designed for LTCC sintering, it can also be used for binder burning out and sintering process of other relevant electrical products.

3.Technical Specification:

Rated Temperature	850ºC
Max. Temperature	1000ºC
Chamber Dimensions	600mm×600mm×650mm(D×W×H)
Effective Dimensions	500mm×500mm×500mm(D×W×H)
Chamber Insulation Material	Aluminosilicate Ceramic Fiber
Inner Surface of Chamber	Quartz Glass Cover
Heating Elements	Coils in Ceramic Fiber Block
Thermcouple	Type N
Temperature Control Point	4 Points
Pre-Heating	4 Inlets
3 Stages Pre-Filtering of air	1- dust, 2 - water drops, 3 - oil vapor
Temperature Control Mode	Temperature controller imported from Japan
Heating-up Steps	20 Steps
Temperature Record	IPC makes a real-time sampling record of the chamber temperature and the gas heating temperature
Chamber Temperature Uniformity	400mm×400mm×400mm (D×W×H) area is better than ± 3ºC
Maximum Lifting Trip	800mm
Total Power	52kW ( Max Heating Power:40kW, Max Gas Preheating Power:4×3kW )
Outline Dimensions	1520×1520×2250mm(D×W×H)

4.Composition of Furnace Structure
The equipment is mainly composed of outer frame, chamber, bottom support, lifting system and control system.1.Model: BF230-10 Bell Furnace

Bf230-10 Bell-Jar Furnace with a Rated Temperature of 850 º C, Heat Treatment Furnace, Muffle Furnace

1. Chamber Design

The chamber is made of ceramic fiberboard and fiber products, and the outermost layer is surrounded by calcium silicate board. The inner layer is surrounded by ceramic fiber heating plate, from top to bottom 4 groups of heating, independent temperature control. The booster air intake box is provided on the right side, and the exhaust gas collection and exhaust box are provided on the left side. The chimney outlet is installed with an auxiliary exhaust amplifier to ensure that the exhaust gas generated during the sintering process can be discharged in time.

2.Bottom Support Design

The equipment is equipped with lifting base support, which can be loaded after lowering. For safety reasons, the equipment heating and lifting control are interlocked. The bottom plate is mechanically locked in the working position during heating process. The heating process would not start until the bottom plate is locked. There is a sealing layer between the bottom plate and the chamber to prevent the heat loss from gap through the intersection at high temperature.

3. Lifting System
The lifting drive system is located at the bottom of the equipment. The lifting platform is lead screw driving. The whole moving process is that the deceleration motor drives the main wheel and the synchronous belt at the same time drives the four synchronous belt wheels connected to the bottom of the wire bar. The lifting system is stable and reliable. when the bottom plate falls down, open the two front doors, push the shift out button, the bottom plate would move out to load and unload. The lifting control with 3 ways, up, down and stop to make the bottom support start and stop at any height.

4.Control System
FEC(Fully Enclosed Coil) heating plates are at all 4 sides of chamber, the height direction of 4 groups of heating, 4 points of independent temperature control. The temperature control uses imported temperature control module for each temperature zone, and the data sampling enters the centralized management and control of the touch screen operating system. To adjust the temperature, the output ratio of each temperature zone is uniformly controlled by the touch screen monitor.
All 4 heating sections were independently controlled by the N-Type thermal couple, controlling the stability of ±1ºC. Thermal coupling detects the chamber temperature, then send the signal to the temperature control module to control the power module output, so as to obtain accurate temperature control effect.
All electrical strong panels connected to the furnace body are installed at the rear of the heating furnace body to provide the most reliable safety protection. In addition, the heating and lifting interlock, the heating function cannot be opened when the bottom plate is opened.

5.Atmosphere System
During the use of the equipment, dry, clean and oil-free compressed air can be inputted the furnace through the equipment pipeline system. The air flow is controlled by the glass rotor flowmeter with a single range of 24-240L/min. To avoid the disturbance of low temperature gas in the furnace, the gas is preheated by the heater before entering the furnace. The preheating temperature can be controlled by the temperature controller, and the max preheating temperature is 500ºC.
After preheating, the gas is discharged from the pressurized air intake box on the right side of the furnace, and is discharged through the left gas collection and exhaust box. To control the discharge speed of the exhaust gas in the furnace, the exhaust aid system is installed at the chimney outlet which controlled by a flowmeter range 24-240L/min.

6.Real-time touch screen monitoring

Temperature Control: 4 heating control from top to bottom in the furnace (which can be controlled in sections), preheating control for 4 groups of gas outside the furnace.
Action Control: the rise, drop and stop of the bottom support.
Alarm Signal: furnace over temperature, gas preheating over temperature, low air pressure, motor overload, override.
Parameter Setting: process parameter setting, temperature recording.

Shipping List

Delivery list
	Item	Description	Qty
Basic Components	Furnace		1/SET
	inspection certificate	Certificate of major outsourced components	1/SET
	Technical Documents	Instructions, technical documents of the major outsourced parts, etc	1/SET
Key Components	Heating Elements/	/	1/SET
	Flowmeter	TOFCO/YINHUAN	1/SET
	Differential Pressure	TOFCO/DUWEI	1/SET
	Thermocouple	THERMOWAY	1/SET
	Lifting System	Customized	1/SET
	Temp. Controller	Azbil	1/SET
	PLC	SIEMENS	1/SET
	Touch Screen	MCGS ( based on Linux)	1/SET
Spare Parts	Solid State Relay	XIMADEN	1/PC
Spare Parts	Heating Elements	/	1/ PC

4.Composition of Furnace Structure
The equipment is mainly composed of outer frame, chamber, bottom support, lifting system and control system.

Bf230-10 Bell-Jar Furnace with a Rated Temperature of 850 º C, Heat Treatment Furnace, Muffle Furnace

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
Bf230-10 Bell-Jar Furnace with a Rated Temperature of 850 º C, Heat Treatment Furnace, Muffle Furnace

Bf230-10 Bell-Jar Furnace with a Rated Temperature of 850 º C, Heat Treatment Furnace, Muffle Furnace

Bf230-10 Bell-Jar Furnace with a Rated Temperature of 850 º C, Heat Treatment Furnace, Muffle Furnace Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hefei Chitherm Equipment Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!